WECO Multipower 204T Inverter Welder
Multipower 204T is a high sophisticated single-phase Inverter TIG DC welding machine
In TIG DC mode this inverter generator can easily weld ordinary steels, stainless steel and copper.
Multipower 204T is particularly indicated for extremely precise constructions, in petrochemical plants, food industry and other activities which require very high welding performance. Easy to transport, only 11,4 kg, it is the best option for maintenance and repair on field, shipyard and off-shore operations.
Multipower 204T is equipped with a PFC device (Power Factor Corrector) which is dimensioned fur supporting a voltage range from 90 Vac up to 270 Vac, there is besides an intelligent system inside able to apply the generator with the needed energy on the basis of each specific working condition. These devices make it possible, that this generator can be used both with not stabilized lines or motor generators and with over 100 meters long supplying cables.
Features:
- Advanced inverter power source characterized by a robust and reliable industrial construction.
- Recommended for MMA MMA/CELL and LIFT TIG DC applications providing excellent arc characteristics.
- The total protection device located inside the inverter is particularly useful in order to protect the inner components against overvoltage coming from the input power net.
- Equipped with a PFC device (Power Factor Corrector) which is dimensioned for supporting a voltage range from 90 Vac up to 270 Vac.
- Function VRD (Volt Reduction Device) reduces automatically the voltage of the welding machine during the Standby mode in order to allow the processing in those building site where low voltages are demanded for safety reasons (Dockyards, petrol platforms and so on).
- Quick Start, Quick Spot functions.
- Dynamic ARC functions.
- Multitack system.
- 50 programs can be loaded and saved in memory
- Remote controls are available: for torch (UP&DOWN, potentiometer), foot pedal or remote control unit
Multipower 204T introduce new technological solutions in order to reduce the harmonic current emissions according to the future International Standards, to increase even more the power inverter efficiency and to reduce the input current more than 20%.
Voltage
1) 1x230Vac ± 15% @50-60Hz
2) 1x115Vac ± 15% @50-60Hz
Welding Current
1) 16A
2) 32A
Duty Cycle 40°
1) TIG 30% 200A, 60% 140A, 100% 130A
MMA 35% 180A, 60% 130A, 100% 120A
2) TIG 100% 115A
MMA 50% 115A, 60% 110A, 100% 105A
Output voltage 83 - 11 V
Current Range
1) TIG 5A - 200A | MMA 10A - 180A
2) TIG 10A – 115A | MMA 5A – 115A
Dimensions 400 x 160 x 260mm
Weight 11.4kg
Warrany: 2 Years Commercial Warranty
