MOGGY Portable Trackless Welding Carrige. With control and Dual Torch
Gullco Moggy® - Standard Base with Dual Torch - Stitch And Continuous Welding Carriage
The Gullco MOGGY® friction drive travel carriage is designed to perform Horizontal Fillet Welding, Lap Welding and Butt Welding.
It can be fitted with a Gullco Compact Oscillator to perform multi-pass welding. These operations can be performed on horizontal fillets with a minimum radius of 39 in. (1 meter) and up to a 30° incline.
Features:
- Ideal for automatic horizontal fillet, lap and butt welding operations
- Controls are available to perform continuous and/or stitch weld operations
- Dual gun holder assembly is available for efficient simultaneous welding
- Wheels on the standard MOGGY® can be reversed to allow the moggy to run on standard v-groove track
It is a lightweight, portable, four wheel friction drive travel carriage that can be used with or without track to automate welding operations.
A speed potentiometer provides infinite speed selection within the 6 to 115 in/min (15.2 to 292.2 cm/min) range.
The unit comes complete with adjustable guide rolls, travel limit switch assembly, vertical and horizontal slides providing 1 3/4” (44.4mm) adjustment and a semi-automatic gun holder.
MOGGY Carriage with control for continuous or stitch welding, and with a control that uses a Gullco microprocessor to provide accurate repeatability regardless of travel speeds for weld distance on and weld distance off. It has a forward/stop/reverse switch, wire feed start on/off switch, travel speed potentiometer, auto wire feed start with delay carriage start, wire feed connector with 15 ft. (4572mm) control cable. All functions displayed in highly visible LED window.
Type Dual Torch
Speed Range 8.26 to 255.27 cm/min (3.25 to 100.50 in/min)
Length 406.4 mm (16 in)
Width 311.1 mm (12 in)
Height 279.4 mm (11 in)
Weight 13.6 kg (30 lb)
Downloads
Related Products
-
GM-03-100-DPrice Enquiry
